by Moondog55 » Fri 24 Feb, 2017 4:33 pm
Snow depth is a variable
Sometimes none sometimes over 2 metres
Last couple of years I've has a small cast iron Sheepherder type stove because I could drop off prior to the road being closed, this year something lighter and more compact.
Which-ever stove tho I take precautions by bringing along a large 3mm thick aluminium plate bigger than the size of the stove base, some flat timber blocking and a scrap of CCF foam just in case the snow is deep. CCF insulates the snow from the heat of the stove bottom plus the air-gap formed by the wood battens and the 3mm plate is a pretty big heat sink anyway.
I've had to take down and re-erect tents many times during the season to accommodate snow melt.
If I can get the tent onto the ground I prefer to do that and dig out when needed as the deep snow keeps the wind off the tent
I haven't yet worked out where to put the stove and stove jacks in this seasons tent as I don't yet have the stove made.
The flattest area for camping up at Falls Creeks Horseyards camp site also happens to be the most exposed but close to the hut the ground is reasonably flat
Otherwise I stamp out an areas as flat as possible and set-up as per normal on snow and hope the thaws that come regularly are not too bad
Ve are too soon old und too late schmart