So I've bit the dollar bullet and bought a small UL tiny woodstove.
purchased S/H via GearFreak and I've just had a very frustrating 3 hours fitting the unused baffle to the used stove.
Somewhere in the shed is a stove jack I bought for a very different project a few years ago but haven't used and a length ot Titanium I bought from Franko several years ago and have used intermittently in tin can/stockpot stoves so I have two different flue heights to make use of.
This will be for the Black Diamond Megalite I have yet to modify with a short side wall to give me much more usable floor space.
Your thoughts on actual stove placement?
Beside the door on the left hand side as you enter; this being the side that is usually fixed and the RHS opens, centred on that panel and using the short flue or on the RHS of the centre pole and exiting as high as I can get to allow the flue to be supported by the centre pole?