Snowshoe maintenance

Bushwalking gear and paraphernalia. Electronic gadget topics (inc. GPS, PLB, chargers) belong in the 'Techno Babble' sub-forum.
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.

Snowshoe maintenance

Postby Robatman » Sun 07 Aug, 2011 12:14 am

I've got some MSR's with the metal tread running the length of the shoe- great for the icy stuff, but after probably only 8 days of use (in 2 years) the paint is flaking and starting to see some surface corrosion. They are not pointed but slightly sharp and i'm worried the edge will start to go.

How should i treat them- use some sort of rust convertor? just spray enamel over it? Dont know what the metal is- probably some sort of steel, i dont think its aluminuim??
Any similar MSR expereinces out there?
Robert
(EXAMPLE PIC- NOT MINE)
Image
User avatar
Robatman
Atherosperma moschatum
Atherosperma moschatum
 
Posts: 83
Joined: Mon 23 Nov, 2009 10:27 am
Location: Sydney
Region: New South Wales
Gender: Male

Re: Snowshoe maintenance

Postby Nuts » Sun 07 Aug, 2011 12:48 pm

It is steel Rob, I would just give them a polish with fine steel wool then coat with lanotec/lanolin spray to store... you may eventually need to take the burr off with a small file if they get too blunt, i wouldnt get them overly sharp though.
User avatar
Nuts
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 8555
Joined: Sat 05 Apr, 2008 12:22 pm
Region: Tasmania

Re: Snowshoe maintenance

Postby Franco » Sun 07 Aug, 2011 7:17 pm

An earlier instruction sheet from MSR mentioned washing them and drying them and then giving it a spray with WD40, however I don't see that mentioned in the current one.
Found it :
http://www.backpackgeartest.org/reviews ... rk%20Wood/
towards the end of the review.
Franco
Franco
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 2916
Joined: Thu 30 Oct, 2008 6:48 pm
Region: Victoria
Gender: Male

Re: Snowshoe maintenance

Postby Nuts » Sun 07 Aug, 2011 9:30 pm

wd40 isnt the best on plastic (though it could take years to have much adverse effect) we use lanolin spray on all plastic and rubber (works great on crocs.. whatever crocosite is..) .. around vehicles etc
Ive even taken to my boots with it :wink:
User avatar
Nuts
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 8555
Joined: Sat 05 Apr, 2008 12:22 pm
Region: Tasmania

Re: Snowshoe maintenance

Postby Robatman » Sun 07 Aug, 2011 11:59 pm

Thanks guys,
seems just need to apply a layer to stop rust while not in use, Lanolin looks like a good option,
Robert
User avatar
Robatman
Atherosperma moschatum
Atherosperma moschatum
 
Posts: 83
Joined: Mon 23 Nov, 2009 10:27 am
Location: Sydney
Region: New South Wales
Gender: Male

Re: Snowshoe maintenance

Postby Franco » Mon 08 Aug, 2011 4:23 pm

wd40 isnt the best on plastic

Reading that I remembered that Roger Caffin said the same thing at BPL (I think...) .
He was commenting on a suggestion of mine but have no recollection about the specific item, not snowshoes as far as I can remember.

So I looked that up on Google.
This is what the maker have to say :

WD-40 can be used on just about everything. It is safe for metal, rubber, wood and plastic.

http://www.wd40.com/faqs/
Anyway some trivia :

WD-40 literally stands for Water Displacement, 40th attempt. That's the name straight out of the lab book used by the chemist who developed WD-40 back in 1953

Franco
Franco
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 2916
Joined: Thu 30 Oct, 2008 6:48 pm
Region: Victoria
Gender: Male

Re: Snowshoe maintenance

Postby Nuts » Mon 08 Aug, 2011 5:01 pm

Mine comes from an interest in old cars Franco, apparently its been shown to add to the breakdown of some plastics and wire sheathing over time. Its pretty generally accepted as not the best but i dont have much more than that. Lanolin just seems like a more friendly product overall, ask any kiwi...

What i did notice, not that it may make much difference, was that the older MSR shoes in your link seem to have aluminium rails...
User avatar
Nuts
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 8555
Joined: Sat 05 Apr, 2008 12:22 pm
Region: Tasmania


Return to Equipment

Who is online

Users browsing this forum: NIPPER and 49 guests